How to test your PS5 controller
- Connect your DualSense to your computer with a USB-C data cable, or pair it over Bluetooth (hold Create and the PS button until the light bar flashes, then pick it in your computer's Bluetooth settings).
- Open this page in Chrome, Edge or Opera on a computer, and press Connect controller. Choose your controller in the box that appears.
- Press each button, move both sticks in full circles, squeeze both triggers, slide two fingers on the touchpad and tilt the controller. Everything that works lights up.
- Put the controller down and leave the sticks alone for a few seconds to see your stick drift reading.
Full test and basic test
In Chrome, Edge and Opera on a computer, the tester talks to the DualSense directly. That's the full test: buttons, sticks, triggers, touchpad, gyro, accelerometer, battery and controller details.
Other browsers, and phones, can only see buttons, sticks and triggers. The tester switches to the basic test on its own, and tells you what it can't check. You can switch between the two at any time.
What your results mean
| Reading | Healthy | Worth a closer look |
|---|---|---|
| Stick at rest | Under 3% from centre | Over 5%: the stick is drifting. A small deadzone in your game may hide it; above 10% it usually needs calibration or repair. |
| Stick range | Reaches the edge of the circle in every direction | Stops short on one side: worn or dirty stick. |
| Triggers | 0% released, 100% fully pressed, smooth in between | Never reaches 100%, or jumps: worn trigger sensor. |
| Touchpad | Both finger dots follow you across the whole pad | A dot disappears in one area: dead spot on the touchpad. |
| Gyro | Settles near zero when the controller lies still | Keeps moving while still: recalibrate motion in your game or system settings. |
Is it safe?
The tester only reads your controller while this page is open. Nothing about your controller is uploaded or stored on our servers, and no settings are saved to your controller. During the full test your light bar or player lights may change while connected; they go back to normal when you connect the controller to your PS5 again.
Questions
Can I test a PS5 controller without a PS5?
Yes. Connect the DualSense to a computer by USB-C cable or Bluetooth and open this page in Chrome, Edge or Opera.
Why does it only show a basic test?
Your browser can only read buttons, sticks and triggers. Open the page in Chrome, Edge or Opera on a computer for the full test with touchpad, gyro and battery.
Does it work on a phone?
Phones can run the basic test if your controller is paired to the phone. The full test needs a computer.
Does it work with the DualSense Edge?
Yes. The Edge works in every test, and the DualSense Edge tester also checks its back buttons, Fn buttons and trigger stops.
What counts as stick drift?
A stick that reads more than about 5% away from centre when nobody is touching it. Small amounts can be hidden with a deadzone setting in your game.
Is this made by Sony?
No. ControllerCheckup is an independent site and is not affiliated with or endorsed by Sony Interactive Entertainment.